Monday, August 27, 2018

How to Flash JIO Mobile, How to Flash LYF F81E



Hi Friends,

How Are You..?

There is some issues with my Costumers and Students that they have LYF F81E  Mobile phone. but it is hanged on LOGO, some friends are saying that their phone working very Slowly, and Consuming Battery, what to do...?


Don't Worry, Here is Solution...

If you want to repair this phone with this fault  you have to flash your phone with tested firmware file. after flashing your phone will work properly.


Before flashing be sure that your phone's Battery is fully Charged or may be 50% to 70% is necessary charged battery, down battery may be caused of damage your phone.

Another thing you have to look before flashing, your important Data as Pics, Audios, Videos, Contact Numbers etc. all data will be deleted after flashing then keep it at safe place, if you think that your Data is very important,

Copy your files or data to SD Cards, Pen Drive, Computer or transfer to another phone.

For Flashing Some Requirements are:


High Quality USB Cable (Low Quality Cable can Create Problems)


Drivers in PC.

Flash File (Link is given Below)

Laptop or Computer.

Now You are Ready to Rock

Download and Extract Firmware File


Download and install SPD Drivers.

Open Extracted  Firmware File.

Open Flash Tool.

After Complete above's Step, switch off your mobile, wait 5 to 10 Seconds. Connect Phone to Pc, with pressing 3no.  Button of Keboard.

Click on Configure Button and take file and Click on Start Button.

Flashing will start and it will be take about 15 minutes.


Flashing Done.


How to Flash Video Tutorial:-



SPD drivers


LYF F81E Firmware

Sunday, August 5, 2018

How to Flash Yureka YU5510


If it seems that your mobile eating your battery, having hanging problem, in this fault you can factory reset your mobile then You will See that your 70% problem has gone, But you can lost your Data so Please create a backup of your mobile before take this action.



But Sometimes problem do not go after factory reset mobile, in this case you have to flash it. not in hanging problems you need to flashing, there are some more reason for flashing your mobile.

If mobile stucked on Logo, automatically Installing apps, deducting your balance. Auto Restarting you need to flash it. Before Start Flashing check your battery for charge, battery should be charge about 70% or more. Low battery may be cause of damages  your device.

And More Important is your data as Contact numbers, your some videos with friends or with your family, your photos/images which clicked by you at very rare moments, some favorite songs collections which you collected by hard working all is important. So save your data because as I have already told you that after flashing or factory reset all data will be deleted.

For backup you can copy all contacts at your sim card, for save photos, videos, songs you can use SD Cards, Pen Drive, External Harddisk, Another Mobile whatever you have at this moment of flashing your mobile.

After charge your battery and Save your very very important data, there are some steps of flashing mobile follw this step by step, definately you can do it.
  

Now We are going to Flash Yureka YU5510 step by step.

1. Install Drivers.
2. Install YGDP TOOL.
3.Download and Extract Flash File.
4. Open YGDP Tool.
5. Take file.
6. Connect Mobile with pressing volume up button.
7. Click On start.


Downloading Link:- 

YU5510 Flash File

Saturday, August 4, 2018

How to Flash Nokia 3 Nokia 4 Nokia 5 Nokia 6


If  it seems that your mobile eating your battery, having hanging problem, in this fault you can factory reset your mobile then You will See that your 70% problem has gone, But you can lost your Data so Please create a backup of your mobile before take this action.

But Sometimes problem do not go after factory reset mobile, in this case you have to flash it. not in hanging problems you need to flashing, there are some more reason for flashing your mobile.

If mobile stucked on Logo, automatically Installing apps, deducting your balance. Auto Restarting you need to flash it. Before Start Flashing check your battery for charge, battery should be charge about 70% or more. Low battery may be cause of damages  your device.

And More Important is your data as Contact numbers, your some videos with friends or with your family, your photos/images which clicked by you at very rare moments, some favorite songs collections which you collected by hard working all is important. So save your data because as I have already told you that after flashing or factory reset all data will be deleted.

For backup you can copy all contacts at your sim card, for save photos, videos, songs you can use SD Cards, Pen Drive, External Harddisk, Another Mobile whatever you have at this moment of flashing your mobile.

After charge your battery and Save your very very important data, there are some steps of flashing mobile follw this step by step, definately you can do it.

Now We are going to Flash Nokia 3, Nokia 4, Nokia 5, Nokia 6 step by step.

Requirement for flashing of Nokia 3, Nokia 4, Nokia 5, Nokia 6
1. Download original software for TA-1000 (build 00CN_3_31A_SP) in nb0 format (Link is Given Below).
2. Download OST LA v6.0.4. (Link is Given Below).
3. Download patch. (Link is Given Below).

Steps for Flashing:

1.    Unpack OST LA with 7zip and install on your PC.
2.    Unpack patch (password 123).
3.     Replace an exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA
4.    Unpack software with 7zip.
5.     Start patched OST LA from the above mentioned folder by double left-click on exe file.
6.    If everything is alright the program will run without requesting login and password to hook up with a server.
7.    Select the original software.
8.    Enter your Nokia 6 into Download mode connected with USB cable to your PC.
9.     After your device enter into Download mode, the button Edit Phone Information will be available. Click on this after click a error will come but don’t worry, Press on OK Button
110After button Next become active, press on it and flashing will start it will take about 5 to 7 minutes.


Downloading Link :-


Wednesday, August 1, 2018

How to Flash Nokia Lumia


If it seems that your mobile eating your battery, having hanging problem, in this fault you can factory reset your mobile then You will See that your 70% problem has gone, But you can lost your Data so Please create a backup of your mobile before take this action.

But Sometimes problem do not go after factory reset mobile, in this case you have to flash it. not in hanging problems you need to flashing, there are some more reason for flashing your mobile.

If mobile stucked on Logo, automatically Installing apps, deducting your balance. Auto Restarting you need to flash it. Before Start Flashing check your battery for charge, battery should be charge about 70% or more. Low battery may be cause of damages  your device.

And More Important is your data as Contact numbers, your some videos with friends or with your family, your photos/images which clicked by you at very rare moments, some favorite songs collections which you collected by hard working all is important. So save your data because as I have already told you that after flashing or factory reset all data will be deleted.

For backup you can copy all contacts at your sim card, for save photos, videos, songs you can use SD Cards, Pen Drive, External Harddisk, Another Mobile whatever you have at this moment of flashing your mobile.

After charge your battery and Save your very very important data, there are some steps of flashing mobile follw this step by step, definately you can do it.

Now We are going to Flash Motorola XT1550 step by step.

Requirement for flashing of Nokia Lumia 520
1.  First Download and Install Nokia PC Suit. (Link is given Below).
2.  Download Lumia Flashing Tool (Link is Given Below).
3.  Download and Extract Nokia Lumia 520 Flashing File.

Steps for Flashing:
             

1.  Put your phone at Flash mode (Press Power and Volume Up key).
2.  Connect phone to pc Open Motorola Flash Tool.
3.  Open Lumia Flash tool file.
4.  Open ‘‘WPID’’
5.  Open ‘‘Start’’ Flashing tool will Open.
6.  Click on ‘‘Change’’ and select file.
7.  Click on ‘‘Flash’’

Downloading Link:-

  Activate Windows