What is Electronics Componets? How Many Types of Components?

What is Electronics Components?

Electronics Components  are discrete device in an electronic system which is used for affect electrons or their field, electronic component are mostly Industrial product available in singular form, without  these components circuit are never complete or did not function well. There are many components in electronic System.

How  Many Types of Electronics Components:- 

           

If we talk about how many components then it is very difficult to count on finger tips, but if we talk about types of components then there are only two types of Componets. i) Active Components. ii) Passive Components.

1. Active Components:- We can say that Active components are source of energy in any electronics circuit (Usually DC Circuit) and usually can inject Power into a Circuit. Many Copmponents can amplifying signal or supply are also included in Active Components Such as Transistors, Triodes, Vacume Tubes, Diodes etc.

2. Passive Components:-  can’t Introduce energy into the circuit. These are not source of power also can trasnsfer supply or power only. They can not amplify signal but in some cases they can increase voltage (through Transformer).

 

How to Flash Micromax E484, Flashing Error of Micrommax E484

In this Article I'm Going to discusss about Flashing Error in Micromax E484.
Micromax E484 has Mediatek CPU and as we all know that SP flash tool is using for flash Mediatek CPU's Devices, But in this case SP Flash tool is failed as could'nt read firmware file as .scatter file. Error are coming as following picture.

I used many version of SP Flash tool but all time I was getting fail, in the end I used AF Tool for Flashing this Mobile and got success.

Here is Steps for Flashing Micromax E484 by Af Tool:-

Before Flashing be Sure that battery is Charge about 30% to 50%, and you have copied your all data from your mobile (If Possible.

Now Open Aftool by click right click and Run as Administrator you Should connnected with Internet.
Now Select Scatter File.
Click on Download Button and Connect Mobile with PC by pressing Volume down Key.
Flashing will Start.

Watch Full Video Tutorial:-
            
Downloading Link:-
Micromax E484 Flash File

LYF LF 2403 Hard Reset, Unlock Jio Keypad mobile Without Flashing

What is Hard Reset?

With hard reset Method you can reset your device setting and apps to factory condition.

why need you hard reset your device?

If your handset work slowly or not work properly or hang at logo or show any error. then you can hard reset your handset to fix your problem.

if you forgot your password, pattern lock, email id then you can reset your device with hard reset method.

Warning: All data erased after hard reset so take a backup before hard reset your device.

Before you buy or give handset or tablet to repair shop, please try the following procedure to repair your device. First charge your battery more then 70%, backup your important data if possible and in most cases take out SIM and SD card before factory reset. impossible to recover your data after hard reset, so backup is always important. For all of your data, a backup should be done on an external device, SD Card, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you want to sell your phone and you want to wipe your personal data hard reset is good idea.

 Sometimes it is very usefull to Unlock our mobile or fix viruses from the phone but it is not possible to fix problems in every mobile. sometimes we have to flashing mobile. 

Jio LYF LF 2403 Hard Reset:-     

Watch Video of Jio LYF LF 2403 Hard Reset:-

          

1. Switch Off Your Mobile and wait 5 to 10 seconds
2. Now Press and UP Key from Navigation Keys and Power Key.
3. After vibrate mobile release Power power Button Immediately.
4. Now Settings Symbol show on display
5. Now press OK key and Back Key
6. Now Select Wipe Data/Factory Reset and Press Home Key to Continue
7. Now Select Yes -- Delete All User Data and Press Home Key to Continue
8. Now Select Wipe Cache Partition and Press Power Key to Continue
9. Now Select Reboot
10. Now wait until Device reboot successfully
11. Enjoy your Handset Hard reset successfully.

Jio LYF F90M Hard Reset, Unlock Passcode of Jio LYF F90M

What is Hard Reset?

With hard reset Method you can reset your device setting and apps to factory condition.

why need you hard reset your device?

If your handset work slowly or not work properly or hang at logo or show any error. then you can hard reset your handset to fix your problem.

if you forgot your password, pattern lock, email id then you can reset your device with hard reset method.

Warning: All data erased after hard reset so take a backup before hard reset your device.

Before you buy or give handset or tablet to repair shop, please try the following procedure to repair your device. First charge your battery more then 70%, backup your important data if possible and in most cases take out SIM and SD card before factory reset. impossible to recover your data after hard reset, so backup is always important. For all of your data, a backup should be done on an external device, SD Card, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you want to sell your phone and you want to wipe your personal data hard reset is good idea.

 Sometimes it is very usefull to Unlock our mobile or fix viruses from the phone but it is not possible to fix problems in every mobile. sometimes we have to flashing mobile. 

Jio LYF F90M Hard Reset:-     

Watch Video of Jio LYF F90M Hard Reset:-

1. Switch Off Your Mobile and wait 5 to 10 seconds
2. Now Press and UP Key from Navigation Keys and Power Key.
3. After vibrate mobile release Power power Button Immediately.
4. Now Settings Symbol show on display
5. Now press OK key and Back Key
6. Now Select Wipe Data/Factory Reset and Press Home Key to Continue
7. Now Select Yes -- Delete All User Data and Press Home Key to Continue
8. Now Select Wipe Cache Partition and Press Power Key to Continue
9. Now Select Reboot
10. Now wait until Device reboot successfully
11. Enjoy your Handset Hard reset successfully.

How to Flash Lava Flair Z1, Contacts are not showing in Mobile

If it seems that your mobile eating your battery, having hanging problem, in this fault you can factory reset your mobile then You will See that your 70% problem has gone, But you can lost your Data so Please create a backup of your mobile before take this action.

But Sometimes problem do not go after factory reset mobile, in this case you have to flash it. not in hanging problems you need to flashing, there are some more reason for flashing your mobile.

If mobile stucked on Logo, automatically Installing apps, deducting your balance. Auto Restarting you need to flash it. Before Start Flashing check your battery for charge, battery should be charge about 70% or more. Low battery may be cause of damages your device. 

And More Important is your data as Contact numbers, your some videos with friends or with your family, your photos/images which clicked by you at very rare moments, some favorite songs collections which you collected by hard working all is important. So save your data because as I have already told you that after flashing or factory reset all data will be deleted.

For backup you can copy all contacts at your sim card, for save photos, videos, songs you can use SD Cards, Pen Drive, External Harddisk, Another Mobile whatever you have at this moment of flashing your mobile.

After charge your battery and Save your very very important data, there are some steps of flashing mobile follw this step by step, definately you can do it.

Now We are going to Flash Lava Flair Z1 step by step.

1. Install SPD Drivers.

2. Download Research Upgrade tool.

3.Download and Extract Flash File.

4. Open Research Upgrade.

5. Select "Pac File"

6. Connect Mobile with pressing Volume - and + key.

7. Click On start.

 

Downloading Link:-

Flash File of Lava Flair Z1 Download Here